As a general rule of thumb, insulation added to an attic provides the most bang for your buck when increasing insulation. However, if your attic is already well insulated, you may find that reducing air infiltration or installing a more efficient heating/cooling system provides a better return on your investment.
don't understand the question...
anytime between 2:30 and 4:15 p.m.
My house was built in 1950, with it still has the original attic installation. How long does the installation last? is it time to update or add more>
Every little bit helps so sure, add insulation were you can. Here's an idea: you might try spreading old blankets on the attic floor in the part being used for storage. Again: Every little bit helps.
Radiant Barrier is fairly cheap if you look online. I did my attic this spring and at that time the cheapest was from www.ecofoil.com at $125.00 / 1000 s.f. I didnt need to add blow in but I think its around $5 for 16 cubic ft.
It can save you as much as $145 a year for every 1,200 square feet of ceiling area that is insulated. Savings which add up!
Times are tough in the financial department these days and many individuals are opting to optimize the efficiency of their indoor climate control by installing DIY attic insulation in their home or office. While most individuals are perfectly capable of completing this task without the aid of a paid professional, three major tips can keep you on the right track when it comes to installing attic insulation. First, ensure that you are using the right insulation for your particular environment. Second, make sure your vapor barrier is facing the right way. Third, be sure that you are insulating every surface that requires it, as skipping essentials can add up to higher heating bills when the cold winter months are upon you.Proper MaterialsIn order to successfully complete your attic insulation project, you must first set yourself up for success by selecting the proper insulation materials for use in your particular environment. Attic insulation materials are available in three main forms: fiberglass, rock wool and cellulose. Do some research online with the help of your favorite major search engine in order to discover which of these insulation materials will give you the best return on your investment in your particular setting.Vapor Barrier CheckWhen installing your attic insulation, you should always double (and triple) check to make sure that the vapor barrier is facing downward, toward the space where the people in your environment do their living and working. If you make a mistake on this key aspect of the attic insulation process, you will be creating future trouble for yourself in the form of water damage. This is due to the fact that a vapor barrier facing the wrong direction will trap moisture instead of dispersing it.Cover All Required SurfacesIt seems as though everyone is exceedingly busy today and you may be tempted to install attic insulation on your attic walls alone. While this may initially save you a bit of time, it will wind up costing you a good amount of money when winter rolls around. Make sure to install attic insulation on the ceiling of your attic as well as the walls, so that your home is properly insulated from the weather.
Increasing the insulation in your attic is, in many cases, the best place to begin. Check with your local building inspection department and local insulation contractors for additional information.It is possible to add attic insulation to a point of diminishing returns where the money would be better spent on improving other inefficient areas such as excess air infiltration or replacing inefficient heating and cooling systems.Check with federal, state, and local agencies for tax credits that are available for energy reduction repairs and improvements.
If you're installing insulation yourself, remember these guidelines when using a vapor barrier: * Always place the vapor barrier towards the warm side of the insulated area - facing downward on the attic floor or to the interior side of the wall. * When adding a second layer of insulation to an attic, do NOT add a second vapor barrier - this can trap moisture inside the first layer. Use loose-fill or unfaced batts or blankets; if only faced batts are available, cut facing every few inches to allow air to pass through. * If the vapor barrier tears during installation, tape it tightly. * If you have a crawlspace, add polyethylene vapor barrier on the floor of the area to reduce condensation from ground moisture.
If you do not have central heat ( i.e. a furnace), then you need to have a space heater of some kind. If you did not have a chimney, you could get a kerosene stove or an electric heater. If you have access to the attic, you may be able to add insulation. Insulation may also sometimes be blown in between the walls. If you do not have storm windows. you can stretch plastic over the outside.
Add cutieho5 shell anwer all questions
The main disadvantage of super insulation is cost. Super insulation requires more insulation material and may require greater depth in the construction to accommodate the insulating material, and therefore the construction costs for the building may be greater, both for the insulation and the other building materials. This may also change some construction details and add to the time required for construction, as the builder may not be as familiar with the details.
Might be an idea to tell us the SIZE of the basement to start with.