Yep. They are welded in place originally. The door side is easier, the door post side is very time consuming. If yours is not to far gone they have a pin and bushing kit to rebuild your hinges. This would be the cheapest way to go.
To fix a car door that is sprung due to a bent or damaged hinge, the best thing to do is replace the hinge. If the hinge is welded and not bolted to the vehicle, the entire door will have to be replaced.
To change the upper door hinge on a 1997 Dakota, first, support the door with a jack or a helper to prevent it from falling. Remove the door panel if necessary to access the hinge bolts. Then, use a socket wrench to remove the bolts securing the upper hinge to the door and the body of the truck. After replacing the hinge, reattach the door and ensure it aligns properly before tightening the bolts.
To determine if the door hinge is loose and needs repair or replacement, check if the door sags or does not close properly. If the hinge is visibly damaged or the door does not align correctly, it may need to be repaired or replaced.
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.
With your mouth.
Only the hinge pins can be replaced without major bodywork as the hinges are welded to the doors and the frame.
Your oven door hinge may be stuck due to debris or lack of lubrication. To fix it, try cleaning the hinge area and applying a lubricant. If the issue persists, the hinge may need to be adjusted or replaced by a professional technician.
Open door look at the hinge remove two pins holding it on and remove door place it on ground, pick up new door put pins back onto the hinge well holding door and you should be done.
door hinges attached to door and hinge post
support the door then remove the hinge to door bolts and lift door off.
The pin that slides into a door hinge is called a hinge pin. It is usually removable to allow for door removal or adjustment.
Are the screws on the door hinge stripped?