0
Is it ok to put furniture immediately on laminate flooring that has just been laid?
Wiki User
∙ 11y ago
Assuming that you do in fact mean laminate, yes, you can put furniture on it right away. There is no adhesive involved and hence no drying time.
However, if you mean vinyl (and many get the 2 confused), if it is a glue down vinyl, you need to wait until it properly dries and you should check the manufacturer's instructions. For most, 24 hrs would be sufficient, but you should check.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Hard wood floor is too expensive, but I've been wondering about laminate flooring. Is this a good option?
Laminate flooring doesn't look quite as good as hardwood flooring, but it is less expensive and more durable. It resists stains and fading. It doesn't get nicked or scratched as easily as hardwood. For a good side by side comparison of laminate flooring and hard wood floors check out Floor Facts Hard wood vs. Laminate.
Where can I find a flooring company in Nashville, Tennesee to install laminate in my home?
A good company to see laminate floor installing would be goodtag.com A very reliable company, check them out! Their company has been around for several years.
Which flooring company in Dubai provides Kronopol laminate flooring?
Fusion Floors in Dubai is the best supplier of kronopol laminate flooring. Fusion floors provide high quality, durable flooring materials in Dubai such as wooden, carpet, vinyl, parquet, steel access floorings for commercial and non-commercial needs.Fusion Floors is the dealer for world-famous Kronopol which is under Swiss Krono Group. Engineered hardwood flooring has been regarded by many as the real wood flooring, is credited with offering more stability compared to solid wood. Parquet flooring floors are the widely used product across the globe because of its user-friendly installation, easy maintenance, and various other benefits. Laminate flooring is characterized by its high-quality materials, unmatched strength, and durability.For more info : fusionfloordubai
What is laminate furniture?
Laminates are applied wood additives to the surface of furniture. These applications can be made using synthetic materials or very thinly sliced wood strips. These applications are usually held in place using a bonding agent or synthetic glue. Historically laminate furniture has been associated with low-end furniture due to their relatively low cost as compared to their real wood counterparts and their limited lifespan. Although many manufacturers still use substandard laminates, the furniture industry has seen vast improvements in the quality of laminates in the last 10 years. There really is no substitute for real wood, but depending on your needs, laminate furniture does have its place. In Laminate Furniture a thin sheet is pasted over plywood surfaces to improve the appearance, abrasion resistance, durability and to simplify cleaning. Thickness rang is normally from 1mm to 1.5mm
How do you cut laminate flooring for transition pieces to fit if the flooring has already been installed?
This can be quite difficult. I would recommend removing the flooring back to the point where the transition needs to be, if possible, then cutting the single piece or pieces that need to be cut. The other method would require dropping a circular saw in from above and finishing the corners of the cut with a chisel.
What is the best price for laminate flooring?
At Freedom Flooring, we specialize in finding flooring solutions that are long-lasting, contemporary, and stunning to the eye. Since 2016, our team of Edmonton flooring specialists has been dedicated to providing the best flooring services our city has to offer. No matter what brand or style you are looking for, we’re confident you’ll find the right finish for you in one of our many collections. Need help with installation? We do that too! And we always work with you to ensure your project is completed on time, while still providing the exceptional level of service we are known for. If looking for flooring in Edmonton, we encourage you to contact us. We’re always ready to provide our clients with flooring that fits their vision.
Wood Flooring Installation?
form_title=Wood Flooring Installation form_header=12503 Is this need emergency in nature?*= () No () Yes How do you categorize this flooring?*= () Install wood flooring () Refinish existing wood flooring () Repair existing wood flooring Please choose which rooms are involved with this flooring project.*= [] Multiple rooms [] Kitchen [] Living or dining room [] Bathroom [] Bedroom(s) [] Other living space Have the project materials already been purchased?*= () Yes () No Please choose which type of wood flooring you would like to have installed:*= () Natural wood () Want recommendation () Wood laminate
Cost of laminate flooring?
Laminate is a technique. Basically, it glues a layer on top of another substance. The patent for the original laminate expired years ago and the term has entered the language and has been used as a generic description. There are already all sorts of prices of laminate given. You will need to be more precise in the type you want. You can expect to pay around $6 a square foot with the price varying several dollars in each direction depending on quality and what you want.
Installing Laminate Floors?
Installing laminate floors is a popular DIY project because laminate flooring is relatively easy to work with and doesn't require the same level of skill as hardwood flooring installation. Here are the general steps to guide you through the process of installing laminate floors: Materials and Tools You'll Need: Laminate flooring planks Underlayment (if not pre-attached to the planks) Spacers Saw (circular saw or jigsaw) Measuring tape Utility knife Flooring installation kit (includes tapping block and pull bar) Hammer Pencil Safety goggles Knee pads Step 1: Prepare the Subfloor Ensure that the subfloor is clean, dry, level, and structurally sound. If needed, repair any damaged areas and remove any existing flooring or carpeting. Install a moisture barrier or underlayment if required by the manufacturer's instructions. Step 2: Acclimate the Laminate Flooring Allow the laminate flooring to acclimate to the room's humidity and temperature for the recommended time (typically 48 hours) before installation. This helps prevent warping or buckling. Step 3: Plan the Layout Plan the layout of the laminate flooring, considering the direction of the planks, doorways, and any obstacles in the room. Laminate flooring should be installed perpendicular to the longest wall to create a visually appealing appearance. Step 4: Install the Underlayment If your laminate flooring does not have an attached underlayment, roll out the underlayment material according to the manufacturer's instructions. Overlap seams and tape them to prevent moisture infiltration. Step 5: Start Installation Begin installation in the left-hand corner of the room, working from left to right. Place spacers along the walls to maintain an expansion gap of about 1/4 inch. Step 6: Install the First Row Lay the first row of laminate planks with the tongue side facing the wall. Use a tapping block and hammer to lock the planks together. Be sure to stagger the joints between planks, and cut the last plank as needed to fit. Step 7: Continue Installation Continue installing subsequent rows, interlocking the planks by angling the tongue into the groove and tapping them together. Use the pull bar to help close gaps along the long edges of the planks. Step 8: Cut Planks Measure and cut planks to fit around doorways, corners, and any other obstacles. Use a saw (circular saw or jigsaw) for straight or curved cuts. Step 9: Complete the Installation Continue installing planks across the room until you reach the final row. Be sure to maintain the expansion gap along the walls. The last row may need to be cut lengthwise to fit. Step 10: Install Baseboards and Transition Strips Install baseboards or quarter-round molding to cover the expansion gap around the perimeter of the room. Additionally, install transition strips at doorways and between different flooring types. Step 11: Finish and Clean Carefully remove spacers, and inspect the floor for any visible gaps. Clean the floor to remove any debris, and follow the manufacturer's recommendations for any final steps, such as adding transition strips or applying moldings. Laminate flooring installation is generally straightforward for DIYers, but it's important to follow the manufacturer's specific instructions for your flooring product. If you encounter any challenges or are unsure about any aspect of the installation, consider consulting with a professional installer or seeking guidance from the flooring manufacturer. Proper installation ensures the longevity and appearance of your laminate floors.
Replace That Old Floor Yourself?
Some homeowners think that there is a deep secret knowledge required to install laminate flooring. Well, there isn’t! It is quite straightforward and actually easy. Laminate floors are a type of wood product that is a mix of wood fibers and plastic coatings pressed together and glued with a resilient bonding material. It will provide years of worry-free service even to abused floors. Of course, there are varying thicknesses and types of laminate flooring that may be more suited to one application or another, but they all install rather easily. The individual laminate strips interlock to form the overall floor covering. They lock at the seams and are prevented from sliding where they terminate against the walls. Usually there is a quarter-round trim at baseboard level of old vinyl and other tile floors being replaced, or tack strips that have to be removed if carpeting was the prior floor covering material. Clear the floor surface of any popped up nail heads and fill low spots with floor filler. Be sure when it come time to install laminate flooring that either water proof or water resistant laminate has been correctly picked for the location. If the dog occasionally urinates on the floor, heavy wet mopping is expected, or if installed in a bathroom, then waterproof is the better choice. In all case install an underlayment. Some laminate floors already have an underlayment backing. Other laminate flooring materials require an additional purchase of rolls of underlayment. When deciding to install laminate flooring, the underlayment will prevent noise of the free-floating floor moving against the subfloor. The noise of floors without underlayment is loud and heard with every step. Roll out the underlayment and start in one corner, putting in place a strip of laminate flooring. Install laminate flooring in a way where seams overlap a solid piece. Think of a brickwork pattern. Go all the way to the edge of the wall snapping each next piece in place against the seam of the last. The final laminate strips that are installed may have to be ripped along their lengths in order to be able to cover the seams with new quarter-round or other trim material. Slightly lifting the prior course of strips next to the last row will make it easier to snap the last row into place.
Theres never been a better time to join DirectBuy You'll have access to their extensive current selection of virtually everything for your home cabinetry flooring furniture electronics and mor?
1971
Can vinyl flooring be put on top of laminate wood flooring?
Yes, laminate flooring can be laid over vinyl flooring, however, there are some considerations. First of all, inspect your vinyl flooring for any damage. Acordian style tears will create a "bump" in your finished laminate floor, which will be visibly noticeable, and it won't wear well. Large tears that result in missing pieces of vinyl will cause a "dip" in your finished laminate floor, which is also not a desireable result. Either and/or both of these problem areas will also compromise the integrity of your laminate flooring, and may also cause weak joints.
