0
Not generally no. There would be no point. The easiest is to convert the standard yellow video out to coax with an RF modulator
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the difference between Pr Pb Y and Cr Cb Y audio video ports. will my devices work if a connect the two ports together?
They are both color space video but PrPbY is analog video and CrCbY is digital video.TriviaConventionally the Y is first followed by b then r, as in YPbPr which has led to the wires being known as 'yipper' lines/cables.
Can y cb and cr cables be used in place of y pb and pr cables?
Y Pb Pr cables are identical to those used for YUV, Y Cb Cr and RGB cables. They are therefore completely interchangeable. YUV and YPbPr signals are both referred to as component signals although the precise format of the signals are different. The interface is the same for each, namely three wires. The standard cable is a 75 Ohm co-ax cable terminated in RCA plugs for domestic equipment and BNC connectors for commercial equipment. It is always worth using good quality cable to avoid losses in the signal. RGB uses the same three wires but the signal is separated into three separate colors. Normally, an RGB signal will have additional cables for synchronisation signals so an RGB interface will often have 4 or 5 connectors.
Is there a way to connect HDMIi to RCA?
Most laptops are now equipped with a DisplayPort interface (or similar) which, with the correct adapter, may be connected to televisions with an HDMI or DVI interface. Older laptops may have an S-Video connection (analogue audio/video), or simply a DVI port. If your television has an S-Video port, you may use this for standard definition audio/video. Alternatively, using an adapter, the DVI port may be connected via the HDMI interface on a newer television. When using a DVI connection, you must provide an alternative connection for audio, as unlike HDMI, DVI does not carry audio. This can be problematic when using a DVI-to-HDMI adapter, as most consumer televisions provide no way to map separate audio and video sources to the same channels, or for mixing analogue and digital sources. Some televisions also include VGA connections, though they do not tend to provide high-definition output (despite VGA having more than adequate bandwidth) as they expect XGA standard input (1024x768). If a VGA interface is available on your television, there will normally be an audio jack interface for audio too. DVI-I ports on computer equipment provide piggy-backed analogue connectivity (unlike digital-only DVI-D interfaces) via a DVI-to-VGA adapter. To determine which type of interface is provided should be as simple as looking at the port. If the port includes a cross-shaped 'hole' (i.e- if it looks like [+::::::] ), it is usually DVI-I, though some cheaper graphics cards manufacturers have been known to use the DVI-I port on a DVI-D interface, possibly in order to trick consumers into buying an inferior product. If it is more like a hyphen ( [ - ::::::] ), it is definitely DVI-D and can only be connected to a digital interface (such as DVI or HDMI).
Coaxial adapter for ypbpr cable?
Coaxial adapters for YPBPR cable can be found at most Radio Shack stores. This type of cable in VGA and Audio to HDMI conversions.?æ
Is s video beter than ypbpr?
I dont believe it is. YBbPr is capable of outputting High definition (1080) where as S-video is Standard Definition
Is there an rf modulator that has ypbpr ends intead of regular yellow white red?
As rf modulators are usually mains powered convention says the standard cabling is easier to get
What type of component video is characterized by having three RCA plugs at each end?
RGB, YPbPr is characterized by having three RCA plugs at each end.
Can you plug a PC in to a Alba lcdw16hdf TV?
There are no dedicated PC inputs in the rear of this Alba LCDW16HDF model. There are, however, an HDMI, a SCART connector, Component Audio/Video Inputs (YPbPr), a S/PDIF input (digital audio input), an RF Input to connect to an antenna or a coaxial cable, and finally, there are stereo audio line outs. The HDMI input is compatible with the DVI outputs found on more modern PCs-all that is required is a simple pin adapter. Picture quality can be excellent via this method.
On xbox 360 i have YPbPr plugged in but no sound i know the red and white are for sound but i have no slot for them but i do have a scart slot if i try scart the picture is not good?
There should be a little square hole at the end that plugs into the Xbox 360. This is for an optical audio cable that hooks to a surround amp.
How can you connect a gamecube to a TV with component YPbPr and video and audio RL inputs - and will it lag?
Nintendo released a component (YPbPr) cable when the GameCube launched, but quickly stopped supporting it. Newer consoles don't have the "Digital A/V Out" port at all. If you have one of the original models with that port, you can try to track down the component video cable, although they tend to be rather expensive since there weren't many made. There are no cheaper, third-party alternatives for this cable. To when connecting the system to your TV, you will also need the original composite (yellow/red/white) cable for the RL audio, since the component cable does not have its own audio plugs. There will be no lag if the system is connected to the TV with these cables.
What do al ar y pb pr mean on av cables?
Al = Audio Left Ar = Audio Right Y = Luma Pb = the difference between Blue and Luma Pr = the difference between Red and Luma YPbPr is converted from RGB (RedGreenBlue) signal. There is no Green signal needed, it is interpolated from the Luma, Blue and Red signal.
Does ypbpr carry audio and video?
Y Pb Pr is a form of component video with three signals. Y is the brightness signal while Pb and Pr each carry color information. All three are required to produce a full color image and they do not carry audio. Audio will usually require a further two connectors for stereo audio.
What is the difference between Pr Pb Y and Cr Cb Y audio video ports. will my devices work if a connect the two ports together?
They are both color space video but PrPbY is analog video and CrCbY is digital video.TriviaConventionally the Y is first followed by b then r, as in YPbPr which has led to the wires being known as 'yipper' lines/cables.
Can you split from standard video yellow to ypbpr?
A single cable carrying video will be carrying a composite video signal. This signal has brightness and two color signals encoded into a single signal. To generate a component signal (YPbPr)a video decoder is required. They are available from many sources from low cost domestic units to stunningly expensive broadcast models. The better the decoder, the better the resulting image. It is very important to understand that a composite signal has suffered losses because of the encoding. Decoding the signal to component does not restore that quality. Component interfaces can handle high definition as well as standard definition signals. Decoding a composite signal will result in a standard definition signal. Connecting it to a high definition input will not result in a high definition signal. Normally, the only reason to decode the signal to component is to interface to a device that only accepts component signals.
What is the difference between interlace-yuv video vs p-scan ypbpr video?
Interlaced YUV will only display lines 1 3 5 etc. then go to lines 2 4 6... in the next screen refresh cycle of 50 or 60 times per second depending where you live in the world. Progressive will display all the lines at once in every cycle, so effectively twice as much info onscreen in any one cycle. For your purposes YPbPr is the same as YUV. Technically YUV is a type of colour gamut, or colour space standard to ensure colours match from one device to the next. YPbPr is an analog connection using this colour space standard and uses three cables (red, blue & green) just for the picture. YCbCr is a digital version of this. Both are commonly called Component. For the average home TV viewer these terms are all interchangeable - YUV, YPbPr and YCbCr. Even the sales assistant is unlikely to have a clue there is a difference. It is chips with faster clock cycles and processing power that have helped us attain this point. The newer players and TVs allow even more lines on-screen than the original Standard Definition (SD) TV lines of 576 (PAL) or 480 (NTSC). A DVD is however only SDTV resolution. To get more definition onscreen you need to be receiving an HDTV (1280x720) signal normally arriving via satellite dish (DVB-S), a FullHDTV (1920x1080) signal from a ground transmitter (DVB-T), or a Blu-ray Disc player (1080). Cable TV (DVB-C) can be in almost any resolution as it is encoded to suit the bandwidth available and often the resolution is traded off for the number of channels the station want to make available. Regards, Jeremy.
