0
Yes
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you change front brakes on a 1999 Pontiac grand am?
I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?
What would cause your front breaks to wear out fast?
hard breaking or no back brakes. also, back brakes adjusted wrong.
What if you had a tire alignment done 5 times with brand new directional tires plus a tire rotation and the car is stilling pulling to the right?
Something is probably wrong with your front end. Possible it's your brakes but not likely.
Just replaced front brakes and rotors should they be making a slight grinding or squealing noise at first until they wear in?
No! Something is wrong.
Does the larger brake pad go on the rear or the front of the rear brakes of a 2002?
Large goes twoard front, shorter to rear. WRONG! the smaller shoe faces toward the front of the van. if one shoe is shorter then the other, the shorter shoe ALWAYS faces toward the front of the vehicle. this is called servo style brakes, if the the shoes are the same length then it dose not matter witch one faces forward, this is called non-servo style brakes. but in this case GM uses servo style brakes so the smaller shoe faces the front.
Can the wrong coolant cause your car to stall and die?
No.
How do you adjust brakes on hyster fork lift?
I have to pump my brakes what čould be wrong
What is wrong with the brakes if a car won't come to a complete stop after firmly pressing the brakes?
brakes need replaced
Why do your brakes drag after you put new pads on the front of your 2002 Town Country?
The brake pads may not be adjusted properly. The wrong brake pads will also cause the brakes to drag. The brake pads may be too thick.
Why wont the front brakes release on my 1978 Jeep cj5?
you had better check that out thoroughly, it isn't normal for that to happen. Front and rears should be drum brakes, and theres really no valve to malfunction. My first thought is that the cylinders have overextended and cocked sideways locking the shoes against the drum, this could happen if the shoes were extremely worn out, or the assembly was put together wrong. Second thing to check isn't even the brakes, your front axle may be locked. The next time the front brakes are locked up, open one of the brake bleeders up front. If the pressure releases you have a restriction in the hydraulic system such as a pinched brake line or a collapsed brake hose. If you open the front bleeders and the front brakes are still locked up and they are disc brakes, you may have stuck/frozen brake calipers or stuck caliper slide pins.
Why would the front rotors turn after changing the brake pads and rotors?
Possible wrong rotors???
2001 ford f150 front brakes making clicking noise after changing pads and rotors. what could be wrong?
Anti-rattle clips not installed properly
