Ordinary sand, constituted primarily of silicon dioxide, is not attracted by a magnet. Some kind of sand, which contains a magnetizable material, might be so attracted.
because sand does not have metal in it
Because iron is the useful material, not sand.
By using a magnet to separate the iron filings, you'd be left with the sulfur and sand mix. Selecting a solvent for the sulfur will allow you to dissolve the sulfur, and then all you have to do is put the sand in a filter and wash the sulfur through with the solvent.
Hover a magnet over the mixture.The iron filings will be attracted to it.A mixture of sand and camphor will be left. Then,separate the mixture of sand and camphor by using sublimation.
You use a magnet, the magnet will remove the iron filings.hi hi,what you can do is that, get a strong magnet and place it above the mixture. The iron fillings will be attracted to the magnet since it is a magnetic material. In the end you'll be left with salt only (:
because sand does not have metal in it
Run a magnet over the mixture. The iron particles will be attracted to the magnet and the magnet will leave behind the sand.
Iron is one of the most common substances on earth. If the sand is rich in iron (or other magnetic particles), then it will be attracted to a magnet.
With a magnet : only iron will be attracted.
Because iron is the useful material, not sand.
First, place the sulfur, sand and iron filings in a plastic container. Next, use a magnet to remove the iron filings from the sulfur-sand mixture and surely,the iron filings will connect to the magnet, leaving the sulfur and sand behind.
Mixture of metallic and non-metallic substances can be separated using magnet. For example - mixture of same and iron powder.
You can move a magnet back and forth right above the mixture. The iron filings will get attracted to the magnet and stick to it while the sand will remain in the container. Iron is a magnetic material while sand is not.
Anything that is attracted to a permanent magnet will be attracted to (sticks to) a temporary magnet.
By using a magnet to separate the iron filings, you'd be left with the sulfur and sand mix. Selecting a solvent for the sulfur will allow you to dissolve the sulfur, and then all you have to do is put the sand in a filter and wash the sulfur through with the solvent.
What is special about iron filings? Anything with iron in it has this property... magnets are attracted to iron! Magnets do not attract sand. You can use a magnet to separate iron filings from sand.
Phosphorus is not a ferrous metal and cannot be attracted by magnet.