That would be a 2-bolt main in that truck for sure.
6.5.5 ( six on five and a half)
Yes it should bolt right in, Don't foget the 454 radiator should bolt right up to trans. Recomend 400 trans if automatic
Yes, it will fit. By fit, I mean fit in the engine bay. You will have to make modifications.
There are several bolt and nut sizes associated with the 1997 Chevrolet truck bed. The bolt and not sizes range from a half inch to three-quarter inches.
no this transmission has a different bolt pattern and pilot bearing. also the half shafts will not fit properly.
Four and a half quarts.
SAE 10w30.
4 wheel drive suburbans have a 6 lug 5 1/2 inch bolt pattern. 1999 and older Chevy half tons (non 4x4) had the 6 lug 5inch bolt pattern but from 2000 on even those half tons went to the 6 lug 5.5 inch pattern. Remember all 4x4 (4 wheel drive) half tons always had 6 lug 5.5 inch pattern!
depends on what year, 90 and older had 5x4.75 bolt pattern like older Monte carlos, 1991 and newer have 5x5 bolt pattern like half ton trucks and some vans
4 and half or 5 quarts will be fine. Put in whatever gets the dipstick to full.
The speed sensor is located on the transaxle on the passenger side of the car. It is near the half shaft.
The 1991 Mercedes Benz 2.6 liter engine oil capacity is 4.5 quarts. The engine oil pan will hold 4.0 quarts and the oil filter will hold one half quart.