Want this question answered?
yes, if it's a 3 cylinder Mr Geo Metro yes, if it's a 3 cylinder Mr Geo Metro
YES
Interference engines are quite common in consumer automobiles, so even though the specific information is harder to find it is still most likely an interference engine.
Do you mean interference type or non-interference type? If this is what your asking, it is a non-interference type. this means that the timing belt can brake and no damage to the engine will accur. interference type means that if the belt brakes the pistons can hit the valves and bend and or brake stuff. don't worry about it on a geo metro I had two brake and it just stops running and replacing the timing belt takes 45 min to replace, it's easy. "BUGS"
where can you find an engine diagram of a geo metro 3 cylinder 1.0L engine
One car was the 1999 Chevrolet Metro , you could get a 1.0 liter / 61 cubic inch , 3 cylinder engine
The Geo Metro was the only Geo to have a 3cylinder engine.
Sure will. Any Metro motor from 1989-1997 will fit in it assuming that they are of equal size (ie) 3 cylinder 1.0L to 3 cylinder 1.0L. You can put a bigger engine like a 1.3L from a Swift in it but it requires a bit of tweaking.
There are now not many cars in the United States that are made with a 3 cylinder engine. A couple of the vehicles that were once made with a 3 cylinder engine is a Geo Metro and Dihatsu Charade.
There are cars that have engines with only ( 3 ) engine cylinders such as : The Chevrolet Metro with the 1.0 liter , 61 cubic inch , 3 cylinder engine ( 1999 )
The engine and transmission of a manual 3 cylinder weighs 135lbs.
ACCORDING TO THE CHILTON MANUAL YES. EDIT: According to the manuals and parts description, they say these are interference engines. The SOHC versions are not interference while the rarer DOHC versions are interference engines. Since they are not aware of what engine you are working on, they would rather be safe and tell you it is an interference engine. I would have destroyed at least two of these engines if they were interference. I have changed timing belts and been off a few teeth at first.