Sparks plugs are replaced by disconnecting the battery, removing the spark plug cable and boot, and by removing the old spark plug. Next put in the new spark plug, attach the boot and cable and reconnect the battery.
start from far right spark plug hole to the far right bottom distributor then the next one to that spark plug cylinder to the left of the distributor you just did then the next cylinder across the the closes one last one right next to it should be the location
The spark plugs are under the coils, next to the intake manifold.
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Properly dispose of the old spark plugs. Next, put in the new spark plugs, reattach the spark plug boot covers and spark plug cables and reconnect the battery.
no, it takes the same socket as the others. most likely something is down in the hole next to the spark plug
Changing spark plugs is relatively easy. Disconnect the batter and spark plug cables, and remove the old spark plugs. Next replace the spark plugs with new ones, reconnect the spark plug cables and battery.
To replace spark plugs: 1. Remove the spark plug wire. Twist the boot to free it up from the spark plug, then pull the wire off with the boot. 2. Use a 5/8" spark plug socket with suitable extension and either a ratchet or breaker bar to loosen the spar plug and take it out. 3. Set the gap on the new spark plug to 0.045" and use the spark plug socket to install it. 4. Reattach the spark plug wire and move to the next spark plug. I do them one at a time, that way I don't get them mixed up. Now may be a good time to replace the spark plug wires.
Disconnect the battery, remove the spark plug wires and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug wires and reconnect the battery.
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.
Spark plugs are easy to change. One disconnects the batter and spark plug cables, and removes the old spark plugs. Next a person puts in the new spark plugs, then reconnects spark plug cables and the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, reattach the boot covers and spark plug cables and reconnect the battery.