0
They could be, it depends on the vehicle. On a Dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.
They could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.
Wiki User
∙ 10y ago
Wiki User
∙ 10y agoThey could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.
Add your answer:
Earn +20 pts
Are 1994 Mercedes C220 fan-clutch removal reverse thread or normal?
left hand thread
Will the nut on the fan clutch tighten when engine is running?
Generally if it is a thread on fan clutch, yes.Generally if it is a thread on fan clutch, yes.
How do you remove clutch fan from 1993 explorer?
to remove a clutch fan on a ford, you need special tools . also fan thread is left hand thread ,so you unscrew it clockwise
Is the thread on a 1996 BMW fan clutch stud right or left hand?
all BMW fan clutches are reverse thread, so that means you have to have a 1 1/4 in. wrench and hit it hard with a hammer to the right (facing engine) and it should break it loose.
How do you replace the fan clutch on a 1999 Tahoe?
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
How do you remove the fan clutch from 93 suburban theres no nut on shaft?
the fan clutch is attached with one large nut that is part of the clutch assembly .NOTE the the cluth has LEFT HAND thread.
How do you get the clutch fan off the water pump to replace the water pump on a 86 Ford f150 straight 6?
you need to rent a 'clutch fan removal tool' as regular wrenches are too thick.....Serpentine belt engines have a standard thread while v belt engines have reverse threads
What type of fan blade do you need for a serpentine belt on zz4 motor?
a reverse fan blade and fan clutch
How do you take off a radiator fan on 1999 BMW 323i?
The fan is attached to the fan clutch at the front of the engine. It is held on by one very large nut (I think it's 32mm). Usually you will need to remove the plastic fan shroud first. The difficult part of this is that the nut holding on the fan is a reverse thread, the opposite of what you would expect it to be. You turn it clockwise to loosen. Also, you might need a special tool (Google "BMW fan clutch tool") to hold the fan clutch and keep it from turning when you remove the fan.
Is the thread on the water fan clutch stud right hand or left hand?
typically.. right
How does clutch to clutch fan center nut get loosen to remove clutch and fan assembly?
It depends on the vehicle, some are clockwise thread others counter clockwise. Either way it takes the correct wrench and a holding tool.
How do you remove the fan clutch off 1999 ford expedition?
You will need a special tool which you can borrow from AutoZone. One part slips over the bolts on the water pump pulley, while the other goes over the clutch bolt. Note that some people say that they are reverse thread. Look at your fan blades. While looking at the fan and engine from the front, if the fan turns counter-clockwise, then the bolt has normal threads and you turn the bolt counter clockwise to loosen. If your fan has right hand rotation, then your threads will be reverse thread and you will have to turn it clockwise to loosen. The fan on my 1998 Expedtion (5.4l, 4x4) turns left (counter-clockwise), so to take the clutch off, I turned the bolt counter-clockwise (left), which is the same as most bolts. It doesn't take much to loosen the clutch bolt.
