Want this question answered?
The DPFE sensor is a totally separate sensor. Look for the feed pipe to the EGR valve and follow it towards the exhaust. Somewhere along that line you will see two small pipes leading to hoses, that lead to the sensor.
No
I have the same thing wring with mine. The auto place told me that the egr valve will make the o2 sensor seem bad, so now im going to change the egr valve and hope the o2 senor is still good.Wait!Before changing the EGR valve, please look through the "Related Questions" below. The valve might be fine and it's a DPFE sensor, or the valve and secondary air system just need a cleaning.Don't throw money at replacing something just yet...See "Related Questions" below for more
The OBD 2 code, P0401 means "low flow". The most common cause of this code with any Ford vehicle is the DPFE sensor, NOT the E.G.R. Other causes could be blocked passages for the EGR, or leaking or restricted hoses that go to the DPFE. == ==
i have the same truck and the same problem. i have only replaced the egr valve, iac valve, and o2 sensors. I've read some threads of later model trucks with a possible dpfe sensor problem instead thoughdpfe sensor or carbon build up inside the intake
No.Idle air control valve is used by the vehicle ECU to control the idle speed.The O2 sensor measures the oxygen in the exhaust gas and sends a signal to the ECU which controls the fuel being injected into the engine
no, it is not.
Yes it is.
yes same thing
is the crankshaft position sensor the same and the engine speed sensor
The map sensor and boost pressure sensor are the same thing.
The mitral and bicuspid valves are the same thing.