Yes, You need access to a shop press to change the wheel bearing.
to change a front wheel bearing remove macpherson strut and press out bearings with a press, replace with press.
The front wheel bearings are a sealed bearing. You will have to remove the hub from the spindle, remove the lock ring (aka C clip), and press out the bearing. Installation is in reverse order but with a new bearing. YOU WILL NEED A SHOP PRESS TO REMOVE THE BEARING AND THE BEARING RACES.
you need to press out the bearing inside the hub assembly.
you have to press it out and press the new one in just make sure you tighting it real good
Unless you have access to a press or bearing removal tools this is not the job for at home. The bearing is pressed into the hub. You need to remove the spindle, press out the old and press in the new.
must remove knuckle from front and press out old bearing and press in new one cheers!!!
If it is the front bearing: Take it to a mechanic. The bearing in pressed into the spindle. A press is required to remove the old bearing and install the new one.
You need to have a wheel press. Other than that it's self explanitory.
you have to do it at a shop they are press ones i just did mine
How do I put a wheel bearing on with out a wheel bearing press
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
No, you need a press to remove and install the bearing.