There is no reset button, Ford is the only one that has a Inertia switch.
To reset the fuel cutoff switch you press down on the button.
The fuel reset ( fuel pump inertia switch / fuel pump shut off switch ) is in the front passenger footwell , by the kick panel
There is no fuel reset (inertia switch) button on that blazer or any GM for that matter. That is a Ford thing.
Locate the switch and press the reset button.
If you are talking about the emergency fuel shut-off switch (aka inertia switch). just push in the button on top of the switch.
Press the reset button.
There is not a fuel reset or cutoff switch on a Chevrolet.
their is a button on the switch, u press it to reset the switch
On a 2001 Lincoln Town Car : The fuel pump shut off switch ( inertia switch , with the reset button on top of the switch ) is located in the trunk . It is mounted on a bracket by the drivers side trunk lid hinge
It's in the rear of the car, usually on the left, behind the upholstery. Red button = reset.
It does not have a reset switch.
The reset button for the fuel pump inertia switch should be DOWN , if the button has popped up there is no power going to the electric fuel pump and the switch needs to be reset by pushing the button down
In the drivers footwell , behind the kick panel . There is an opening in the kick panel to access the red reset button on top of the switch
No, there is not a resrt button.
the fuel reset switch is directly behind the glove box, to reset it you just push the button on the top of the switch.
Is the " FUEL RESET " light in your dash on If the button has not popped up on the top of the inertia switch than the switch doe's not need to be reset
It does not have a reset button or inertia switch.
its a relay not a button and its by your fuse box
It is equipped with no such button.
A Dodge Dakota does not have a reset button. The fuel system is computer controlled with relays.
The fuel shut off ( inertia ) switch is located in the front passenger's footwell by the kick panel
In the event of a collision, the flow of the fuel stops to prevent fire. You have the press the fuel reset button in order to start the flow again. The switch is called a fuel pump inertia switch.