there is on a 97 Saturn sc1..
my car wouldn't start, wouldn't turn over, would even click.
I checked my fuses and sure enough, it was only a blown fuse on the inside fuse box located on the center console on the passenger side by their feet.
It is between the alternator and starter, on the firewall side of the engine, nearer to the passenger side of the car.
The Saturn SL2 was produced from the years 1990 to 2002 in the United States. The best way to tell if the fusible link in a 1999 Saturn SL2 is fried is that there will be no 12v.
The crank sensor is behind the starter. Remover the starter at the back of the engine and you will see the sensor
The starter for a 1999 Saturn is on top of the transmission under the air filter box. Remove the filter box for easy access.
The starter does not have a fuse, it's wired directly to the battery.
CPS is located above the starter on the back side of the engine held in with a 10mm bolts.
The starter relay is part of the starter.
The starter is on the front of the engine, behind the engine mount bracket.The starter is on the front of the engine, behind the engine mount bracket.
The starter is located between the engine and the radiator on the 1999 Mitsubishi Eclipse. The starter is responsible for starting the car.
The starter relay on a 1999 GMC Suburban with the bib block engine is located on the solenoid for the starter. The solenoid for the starter is on top of the starter.
The starter on a 1999 Voyager is on the front, radiator, side of the engine. It is just above the edge of the engine oil pan and is bolted to transmission.
A 1999 Dodge Durango did not have a 5.8L engine option. The starter on a 5.2L or 5.9L is