NHTSA Campaign Number: 07V452000 www.nhtsa.dot.gov Manufacturer AMERICAN SUZUKI MOTOR CORP. Recall Date: SEP 25, 2007 Potential Number Of Units Affected: 93963 Description EXTERIOR LIGHTING Summary ON CERTAIN PASSENGER VEHICLES, HEADLAMP LOW BEAM OR DAYTIME RUNNING LIGHT (DRL) FUNCTION MAY BE INOPERATIVE DUE TO A MELTED SPLICE PACK ON THE WIRING HARNESS. Consequence INAPPROPRIATE LIGHTING COULD REDUCE VISIBILITY OF VEHICLES AND INCREASE THE POTENTIAL FOR A CRASH. Remedy DEALERS WILL SPLICE THE POWER CIRCUIT WIRES FOR THE LOW-BEAM HEADLAMPS AND DRL FREE OF CHARGE. THE RECALL WILL BE MAILED IN THREE PHASES, STARTING AT THE END OF OCTOBER 2007 AND CONCLUDING BY THE MIDDLE OF DECEMBER 2007. OWNERS MAY CONTACT SUZUKI AT 1-800-934-0934.
what has happend is a wire has melted behind the cluster causing the low beams not to function recomend to take to your suzuki dealer to have repaired the wires are hard to get to and may be cover under by suzuki because it is a problem for these cars all forenza's
for how long is the transmission on a Suzuki Forenza 2008
You remove a few bolts to remove the entire headlight assembly. There is a video on YouTube on exactly this. Do a search for Forenza Replace.
does the 2005 Suzuki forenza have an interference motor or not
being that it a 2008 it may be under warranty the bulbs come with a 3 year and 36,000 mile warranty
i think, depending on the year, that problem is caused by a factory defect.
What is head bolt torque for 2004 Suzuki forenza 2.0
can I add trasmision fluid on suzuki forenza 2008
Suzuki produced the Forenza for only five years. The Forenza was introduced in 2004. The last year of production was 2008, therefore the most recent model would be a 2008 Forenza.
On the sedan model with the hood open look down at the top of the headlight. There's a hole with a gear looking thing, it's a little off center from the middle of the headlight. "Unscrew" it to make your light aim higher. You can use a screw driver to do this. For the hatch back model theres a hex bold on the back side of the headlight with the same looking gear/teeth around it.
4x4.5" or 4x114.3
under the hood