1-1/2 inch drain for above grade and 2 inch drain for below grade. Most UPC-based codes (IAPMO) require 2 inch above and below grade.
The required minimum pipe size for a shower tub drain is 1 inch.
1/2" water lines. Drain line determined by flow rate of showerheads and bodysprays being used. 5.7 gpm or less flow rate would need 1 1/2" drain, which is minimum size allowed.
Absolutely NOT you 2" minimum
No, stand pipe for washing machine is meant only for washing machine. Tie sink into drain line that washing machine stand pipe is tied into. 2" minimum drain line should be what you tie into. Sink drain line use 1 1/2".
Radio Shack "drain pipe tracer".
Foul Air
Yes, a sewage drain pipe can be too large.
The outlet pipe needs to be a minimum of two inches and then expanding to the four inch main line
Normally 3" BUT if your using a sewerage ejector you can go with a 2" grinder pump if properly vented
If you are talking about a roof water drain pipe to sewer it is illegal. If you are talking about a sink drain pipe well that is where they all connect to so yea.
dvw pipe = drain, waste and vent pipe.
If the drain is used as a wet vent for another fixture 2". Otherwise 1.5".
It depends on the configuration of the pipe. It must be a minimum of 3" pipe and the configuration of how it is hooked up must allow for the toilet to be vented and must not disrupt the venting of other fixtures. Call a plumber.