Enter the Theftlock code. If you don't understand what that means, consider reading the owners manual.
how do you change a battery on a 2002 Pontiac Montana
With great wailing and Knashing of teeth. I just replaced mine today. It took me an hour to get it out.
For a Pontiac Montana the battery is a group 78. Follow this link for dimensions.http://www.rtpnet.org/teaa/bcigroup.html
I replaced tge battery in my 2008 pontiac montana ''i took out the cross member and had to take the fuse box apart to get the old battery out when i put the new battery in and put the fuse box back together i got power to the car but no power to the starter '' have you any idea what could be the matter ;;thanks Jim
The battery on a 2005 Pontiac Montana is changed by raising the hood, loosening both of the battery cables, and lifting them off the posts. The old battery can then be lifted out, a new battery put in, and the cables reattached.
To replace the 2002 Pontiac Montana battery disconnect both the battery cables from the terminals. Then, remove the screw to the battery holder, located behind the battery. Slide the battery slightly to the front of the vehicle and lift up. Reverse this procedure to put in a new battery.
with the motor running and radio off press buttons 1 and 4 on the radio this should unlock the radio
on the battery u stupid prick
you will need to call a pontiac dealer and get an activation code, because of the anti-theift system.
Jump starting a Pontiac include jumper cables and another vehicle with a battery. A person will need to put jumper cables on each car battery to jump start it.
that light usually means that the battery is going bad or that your alternator isn't charging anymore
Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Pontiac Montana battery.