Most commercial locks for personal use have the same combination of left/right/left/ turns. If you pay very close attention on the first two turns you can hear and feel where the balls drop. If you apply a little pressure on the third turn, the lock will open as it reaches its number on the dial.
You don't. By definition a combination lock has no key, and thus there is nothing to "pick." Picking a lock refers to mimicking the role of a key in a lock. A combination lock has no key, and thus cannot be "picked."
You don't. By definition a combination lock has no key, and thus there is nothing to "pick." Picking a lock refers to mimicking the role of a key in a lock. A combination lock has no key, and thus cannot be "picked."
By definition, a combination lock cannot be picked, as it has no key. It can be "cracked" in some cases where putting pressure on the lock and diagnosing the dial can reveal the combination. It can also be "bypassed" where tools are used to open the lock without the use of the combination. Neither of these are "picking" the lock however. In order to pick a lock, it must have a key of some type.
You don't. There's nothing to pick. They can be "cracked" or "bypassed" easily enough, but "picking" is by definition, the insertion of a tool to place pins into an appropriate position. A combination lock has none of those features and thus can't be picked. The best way to bypass a master lock is with shims. That's the easiest method. There are several ways to crack locks as well however, but most of those are far more involved than simply using a shim.
If you do not have the combination, there is no way to open the lock. A master combination would defeat the purpose of having the lock.
The specialty of using TSA locks is that a consumer can pick her or her combination for their lock, as opposed to having the manufacturer set the lock combination.
There is no way to unlock an IKEA Gallant combination lock without the actual combination. The combinations are preset prior to purchasing the lock.
The best way is to pick the lock and hotwire the engine.
The best way to open a combination lock is to enter the combination. If this isn't possible, a hacksaw or bolt cutter may do the trick.
There really is no way. If you put the lock on something open important, you may have to cut the lock.
Right.
First of all, you can only pick lock with Alyssa. Second of all, you can only pick the lock of the doors that read "It's locked by a simple lock." Those are the only doors that you can pick lock.