The best way to open a combination lock is to enter the combination. If this isn't possible, a hacksaw or bolt cutter may do the trick.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
The American Tourister Suitcase is made by Samsonite. It has a lock that consists of three dials, that form a combination chosen by the owner. If the owner forgets the combination, he can try to pick it open with a safety pin (one can find instructions for this on the Internet) or take it to a Samsonite Repair Center.
Use the key provided
The Samsonite Aeris suitcase does not come with a standard lock and key. You must use a code to open it with. The code usually comes with the suitcase when it is purchased.
Assuming it has 4 numbers, start with 9999 then 9998 then 9997 etc until you reach 0000. You will hit the combination at some point in the sequence,
Yes, HOWEVER- if it is locked, and TSA needs to inspect the inside of the luggage, they CAN break it open. You should leave it unlocked.
just press the button and turn the codes fast and fast.
just press the button and turn the codes fast and fast.
Sorry buddy you can't get the samsonite lock code bcoz the code is unique with every product of samsonite luggage. Asterios Gontikas.
Set the combination: With the lock open, turn the shackle so it is 180 degrees from the locked position and push the shackle down. With the shackle pushed down, change the combination. When done, release the shackle so it pops pack up. To lock, push the shackle into the hole and turn the dials.
If you know the combination, dial it in, then close the lock, then press and hold the "reset" button. Whatever number you set before releasing the "reset" button will be the new combination.