Want this question answered?
The flasher is built into the hazard switch. You need to pull the dash to replace the switch. It costs about $45 & is available through Chevy dealers. Mike The flasher is built into the hazard switch. You need to pull the dash to replace the switch. It costs about $45 & is available through Chevy dealers. Mike
There is a flasher unit under the dash at the fuse panel but there is also a flasher relay PAC in the trunk just ahead of the spare tire mount. If you replace the underdash unit and it still don't work then check the connections to the relay PAC in the trunk. If that looks good then the relay PAC is bad. New electronic units are still available.
The flasher circuit is in the hazard switch in the dash.
Yes, in the panel under the dash.
The flasher is built into the hazard light switch. You have to remove dash and take it out from the rear of the dash panel.
On a 97 Toyota Camry, the flasher relay is typically located under the dash. When the dash is opened, the flasher relay will be right under the gas pedal.
The flasher unit can be found inside the dash directly to the left of the steering column (when sitting in drivers seat). Just remove the black kick panel on the underside of the dash. You'll then be able to look up inside and you should see a whitish grey mount with the flasher unit clipped to it. The flasher unit will be cylindrical in shape. It should say something similar to "Wagner 323" on it. Hope this helps.
Integrated with the hazard flasher switch (which is in the dash)
Flasher is located under the ashtray in the dash. you must remove ALL lower dash screws to lower the dashboard face then you may access the Flasher.
The turn signal flasher is integrated with the 4 way flasher switch located on the dash.
The hazard switch is the flasher mod.
The hazzard light switch in the middle of the dash includes the flasher.