Baseboards are tough because the installation may have called for not only nails, but glue as well. After the install, a bead of caulk is run along the top to hide imperfections and give it a clean, finished look. If you take a sharp blade to the caulking and cut it away from the board, you'll have a better chance of not injuring your walls. Patience is a BIG factor. If you don't have it find someone who does.
You can remove dry paint from baseboards by scraping the baseboards lightly. You can also use pain thinner depending on the finish on the baseboards.
How do you remove electrical cables without damaging existing cables?"
To remove feviquick mark from the fabric without damaging the fabric you will have to let it dry first before soaking the fabric and wash it gently.
You can remove bearings from a BMX frame with a 'mid' bottom bracket without damaging them using a 3/8s rachet extension.
Take it to the dry cleaners. They can remove just about anything from silk without damaging it.
Go to a doctor.
Take it to the dry cleaners. They can remove just about anything from silk without damaging it.
by removing it with cutting plyer without bending them or twisting them with a hammer
The best way to remove bumper stickers without damaging the car would be to heat the sticker with a blow dryer for about a minute, then begin peeling off the sticker slowly. After it's off apply Goo Off to remove residue.
rub the backing with moistend steel wool and comet
You cannot remove super glue from most fabrics without damaging the fabric.
The only way to remove it without damaging it is to remove the wheel and tap cap off from the inside.