A motor-generator or a solid state power converter can do this.
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
You get power by multiplying the amperes and the voltage. 12V, 10A dc would give the same power as 120V, 1A ac.
It can be if you connect two same watt lamps in series with each other. The 240 volt supply will drop 120 volts across each lamp.
Assuming you are speaking of a standard 120v AC power, a simple one-to-one isolation transformer is made for this purpose. Be sure power rating is big enough for the load.
That is 20.8 kVa but a 208 v single phase supply is very rare. 208 v is usually three-phase, with 120v between neutral and the live wires.
Input would be 120v at 60hz. Standard US wall power.
You would need a 12VDC to 120VAC power supply.
Yes.
120v/12v 30amp power supply comes to mind.
If you mean - can you run a 220v device on 120v where the 220v device needs that level of voltage to operate correctly then the answer is no. Even disregarding the frequency difference which some devices aren't affected by, the voltage difference is too great. Some devices these days, such as phone chargers, laptop power supply units etc will run happily on a voltage range from 100v up to 240v (read the label first) but they are the exception. The question is somewhat ambiguous and needs more information.
A previous member answered: "No. You will need a step up transformer to be able to use 110v appliances in 100v sockets." This is incorrect. In the US, the AC supplied to household outlets may be called 100, 110, 0r 120 Volts. These all refer to the U.S. nominal 110 Volt supply, which can range from as low as 95 volts and as high as 125 volts and most appliances labeled for 110 Volts may be used in the socket. Generally, if the plug fits, it's safe.
Theoretically that can be done with transformers, but the power available would still be limited by the circuit breaker on the original 120 v supply.
In North America, Japan and some of northern South America, standard power supply is within 10% of 120V at 60Hz in Europe, Australia, most of South America, Africa and Asia, and New Zealand it's 230V at 50 Hz.
You can find a 120V power cable at your local hardware store. Look in the section under extension cords.
PC manufacturers supply units in various countries for the domestic house voltage applying there. In the US this is 120v, in Europe 230v, and in Japan 100v. The PC internal volts are identical, they simply have the required transformer/rectifier to give this from the house supply, whatever its value. In some cases the PC can be supplied with dual voltage capability, to make use either side of the Atlantic possible.
...It "supplies the power" to whatever device you're referring to.Baffling, I know.Another answer:A power supply converts 120V or 240V AC power (sometimes called "wall", "line" or "mains" power) into various regulated DC voltages needed in a piece of electronic equipment. In a computer, for example, the power supply will typically provide +12V, +5V, +3.3V and -12V sources to the various components. Voltage regulators in the power supply help keep the voltages steady, even when the input voltage sags.
...It "supplies the power" to whatever device you're referring to.Baffling, I know.Another answer:A power supply converts 120V or 240V AC power (sometimes called "wall", "line" or "mains" power) into various regulated DC voltages needed in a piece of electronic equipment. In a computer, for example, the power supply will typically provide +12V, +5V, +3.3V and -12V sources to the various components. Voltage regulators in the power supply help keep the voltages steady, even when the input voltage sags.