Want this question answered?
30 ft-lbs
where is the blower motor located a a 1997 oldsmobile achieva
Install the lower intake manifold to the engine. Apply sealer, GM P/N 1052080 or equivalent, to the lower intake manifold bolts.Install the lower intake manifold bolts. Tighten the bolts in three steps:TightenTighten the bolts on the first sequence to 8 N·m (71 lb in).Tighten the bolts on the second sequence to 12 N·m (106 lb in).Tighten the bolts on the final sequence to 15 N·m (11 lb ft).I this is what you are looking for.GMmechanic@gmail.com
Remove 2 caliper bolts, squeeze piston back,remove old and fit new pads. Wirebrush slider then re-fit caliper.
follow the top radiator hose to intake,its inside the thermostat cover,two bolts.
no.
Which engine is in this car?
The transmission sifter interlock solenoid location on a 1997 Oldsmobile Achieva is on the valve body. To reach it the drain pan and filter has to be removed.
1997 olds achieva remove starter and wire plug got pulled out and we cant find where it goes? help?
You buy tools and install it!
Should be at the passenger's side firewall
The timing is computer controled and not setable.