Yes. So are rubbermaid plastics and stainless steel.
lavendar
Dry ammonia is dried ammonia gas. The process of drying ammonia is very easy to pull through. You will just need to pass the ammonia gas through a tube filled with KOH or NaOH pallets.
It dries it - in other words, it removes the moisture from the air.
that would be the Green Top Tube that contains sodium heparin this tube also is to draw ammonia.
Lavender - contains EDTA
By drying ammonia, I guess you mean ammonia gas.. To dry ammonia gas you pass it through a drying tube of sorts filled with KOH or NaOH pellets. This method is for almost dry gas, if you are getting your ammonia gas from a ammonia/water solution you probably have to predry it with anhydrous sodium sulfate or some other sort of dessicant before you lead it through the KOH/NaOH pellet filled drying tube.
A vinyl snow tube can be patched with a vinyl repair kit. If one did not come with the snow tube, you can find a kit at a hardware store.
lavendar
Super glue won't dry vinyl tube. You have to dry it with heat or a cloth before gluing it. -Why are you using super glue anyway ? -There are many proper vinyl adhesives that work far better .
Grades R and RM Hose Are Recommended For Use With Acetylene Gas only. Grade R features a non oil resistant and a non flame resistant tube and cover. Grade RM features a non oil resistant and a non flame resistant tube with an oil resistant and flame resistant cover. Grade T Welding Hose Is Safe For Use With All Fuel Gases Including Acetylene. Grade T features an oil resistant and flame resistant tube and cover.
Dry ammonia is dried ammonia gas. The process of drying ammonia is very easy to pull through. You will just need to pass the ammonia gas through a tube filled with KOH or NaOH pallets.
It dries it - in other words, it removes the moisture from the air.
that would be the Green Top Tube that contains sodium heparin this tube also is to draw ammonia.
PL Premium, available in small tube or caulk style tube in Home Depot.
Patching a vinyl water tube is much easier than it sounds. Purchase a vinyl repair kit from a department store and follow the directions to complete the patch. First, you need to clean the area around the hole. Place glue around the area, then press down the patch. Wait at least twenty-four hours, if not more, before inflating the tube.
By Diffusion.........
Anhydrous Copper Sulfate will be white. The original crystals (CuSO4 pentahydrate) will be blue.