"Blowing" FusesFuses and Circuit Breakers are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] from short circuits and overload conditions which can cause extreme overheating which can result in damage to the conductors, and worse, the possibility of a FIRE which could destroy the vehicle. When a fuse, and replacement fuses blow, especially if it happen repeatedly, is an indicator of an UNSAFE CONDITION in that circuit, usually a short. Do not install a larger fuse in a misguided attempt to correct the problem. To install a larger fuse would invite damage to the wiring and an electrical system fire. The proper "fix" is for a qualified technician, who knows what he/she's doing, to troubleshoot the circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse].
check fuses
Check your fuses. See owner's manual fo rlocation and identification of fuses.
Check the fuses.
Sounds like there is an overload in a wire and it is blowing the fuses to keep from doing more serious damage. Have the wires to that fuse traced and tested to see if the wire is bad or if the ground wire is loose.
There is a short in the signal light circuit.
hondahookup. has manual you can download
if you are blowing fuses DO NOT ignore it. most likely you have a short between the fuse box and the ac compressor, you will probly have to rip out the dash to find it, its not easy, seriusly pay someone that knows what there doing to fix it.
there is a short somewhere in dash or heater, you need to fix that to stop fuses blowing
The tail lights on a VW Golf may keep blowing if a short is present in the system. When wires become damaged, they will quickly overload a circuit and blow fuses and bulbs.
you have a short somewhere on that circuit. you need to find it and repair it.
Faulty tail lights - causing a short.
I'm not sure I understand your question. I can't tell if you have one or two different fuses "blowing." The only thing which causes fuses to "blow" is a short circuit condition in the circuit which the fuse protects. IF you have two different circuits blowing fuses, then you have at least two short circuit faults. j3h