This question is not complete. It is like saying "I am dumb?" Why do some people waste their own time asking such "half questions"? And why did I bother to answer it? Because I think these kinds of half-baked question actually spoil this excellent site by wasting space! If you don't agree - Discuss!
If you are asking how to add a switch to a lamp (or other load device) cord, simply cut the line side of the cord and connect to the switch terminals. ----mikey
D. line cord - pg. 1 paragraph 1 in the Study Unit 4- Electric Heating Appliances and fans.thermostat
You Plug It In The Computer With The USB Cord, Then,You Switch Over The Power Switch To On (if already switched to on then switch to off then on again) Now Un-Plug From USB Cord It Should Be On! :-)
Think this one through. There are a few different switch options as far as what can be added to the line cord of a light. A toggle isn't one of them. The in-line switch comes in a few different flavors. The rotary switch is arguably the most common. It's got that little wheel. There is a rocker switch, too. It's pretty close to a toggle in action, so you should look at this one closely. There is also a larger-bodied dimmer switch that can be put in the line cord (but it's for incandescent and not for fluorescent lights). This bad boy has a wheel on it that can be rolled from a point where it "clicks" and turns the light on, and then allows the gradual brightening of the lamp from barely visible to a "full on" position. The big name manufacturer Leviton makes all these switches, but so do other companies. All are designed and engineered specifically for use in a line cord for a lamp. And that's the value of the products. You don't have to figure anything out. Were you planning on installing your toggle switch in a little box to isolate and protect the wire lugs? Or were you just gonna wrap a bunch of black electrical tape around the whole thing? (The former is a pain, and the latter is not advised.) Make a friend in the electrical department of your local hardware store or home center. Pick the right in-line switch and then install it correctly and safely.
The radius is a cord, is it not?
rope, line, twine
If the computer is connected by a USB cord to a powered USB switch, then many connections can be made.
A line through a circle that does not go through the center of the circle is a secant line. A line through a circle that does go through the center is still a secant line, by the way. Compare this to a line segment that has its two endpoints on the circumference of the circle. That line segment is a cord of the circle. If that cord of the circle passes through the center of the circle, then the cord is a diameter of that circle.
Cord means a line made of twisted fibers or threads;The bundle was tied with a cord.
Die
Any line that passes through a circle and touches two points on its circumference is a secant line. (Recall that a line is infinitely long.) If the line passes through the center of the circle, it is still called a secant line. Compare this to a line segment that has its endpoints on the circumference of the circle. That line segment is called the cord of the circle. If that cord passes through the center of the circle, it is a diameter of the circle, which is the longest cord of that circle.
Electrical cord is also refered to as power cord, line cord, and main cable. Electrical cord is mainly used to connect the appliance to the main electricity supply via wall socket.