Follow the 4 spark plug wires from the top of the engine valve cover to the distributor cap. To change the cap remove and label the wires so you can insert them in the correct position. To remove the cap remove the mounting screws. Once you remove the cap you will see a rotor which is also attached by a screw on the side. Replace the cap and rotor and reconnect the spark plug wires in the order noted prior to removal.
Follow the plug wires and they will go to the distributor cap.
It does not have it.
The distributor cap is located on the top of the distributor on a 1996 Sunfire. It is connected to the spark plugs via a wire.
That is the location of wire #1
A 1994 Ford Explorer has the Electronic Distributorless Ignition System ( EDIS ) so it has ( 1 ) coil pack that has six towers on it , so there is no distributor cap
whats the motor.....but regardless if you follow the plug wires they lead to the distributor cap. v6 has 6 plug wires.....one to each plug and all of the on the distributor cap.......v8 has 8 plugs with their wires leading from each plug to the distributor cap
Number 1 on the distributor cap is the top post closet to the firewall. Looking at the distributor cap it would be... top row 1-3 bottom 2-4
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
On top of the distributor. The thing with all the plug wires coming out of it.
how do you remove a distributor rotor on a 92 Nissan sentra
umm, 8?
On top of the distributor at the rear of the engine ( it's the cap that has all the spark plug wires connected to it )