It is in the center console
You can find keyless door locks for domestic properties at Go Keyless online. They sell remote dead bolt locks, remote door knob and remote lever handle locks. They are available to fit any decor in your home.
Is the remote's battery dead?
9j13
This is how to program a Mazda protege keyless (also works with other Mazda models) remote system: 1. Open Drivers door and leave open. 2. Lock and unlock the drivers door using the power lock switch on door panel. (not sure if this is required) 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined) 5. Open and close drivers door 3 times ending with door in the open position. (you can depress the door switch instead) 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should lock and unlock. 8. If programming a second remote press any button 2 times on it and door locks should cycle again. 9. Remove key from ignition and door locks will cycle again. 10. Test remotes. This information was received from: How do you program a keyless entry remote for your Mazda 5
They were an available option.
Where the arm rest is, theres a door, open that door to find a gas lid lever and pull it up
my discovery 3 rear door lock will not lock with remote
Check fuses
An electromagnetic solenoid door lock can be latched or opened from a remote location. Solenoid door locks are mainly used in automotive doors and remote security access.
The batteries may be dead on the remote.
You will need to remove the door cards, then get to the back of the handle, should be some mounts to remove then you should be set.