1342
1.8L engine is 4Cyl 4G93 1.5L engine is 4Cyl 4G15
This is located near the engine. It lets you know when the engine is getting too hot and the coolant is running low.
yes sure 100 percent possible because the only difference with these two engine is the bore diameter.4g15 is about 75.5 bore while 4g13 is 71mm diameter.distributor are just the same.
i don't think it has one .it only got a MAP sensor
yes can
it's around 120HP
Below the steering wheel. It will have 16-pin but not OBD2 compliant. You will need an adapter to convert the to OBD2. The engine (presumably) Mitsubishi 4G15 Efi which originally 12-pin. Proton did not use 12-pin but maintain the 16-pin where 4 pins are not used.
Most definatly its automatic...i think...if i spelled that right
looking down from the top, at the front of the engine, flat area under the exhaust manifold.
Both engines comes from the same maker, but 4G15 has 1.5L displacement, and 4G18 has 1.6L displacement. That makes that cilynder bores are different, so Pistons are different too. I think that interchange block is difficult, you have to make several other changes.
try mobil 1 engine oil i find they work really smooth with it and gives great mpg