There is probably a linkage off inside.
Usually twist handle to open
its on the handle bar. a little metal peice you twist right by the accelerater its on the handle bar. a little metal peice you twist right by the accelerater
remove the two screws from the lens, open the tailgate and remove two more screws, twist the plug from the back side of the lens to expose the light, twist and pull out the bulb
You open the tailgate and that exposes two Phillips head screws in the vicinity of the tailgate cable and latch. remocing the two screws releases the tail light housing. the lamps twist-turn into the housing.
twist the handle, then pop! the jack in the box is staring right at you!!!!!!
What type of faucet is it? Is it two taps, or one, Twist to turn on/off, or push/pull? It is a one handle, twist on/off type faucet.
There are some squares in the back when you drop the tailgate then pull out when it comes out twist the bulb housing and it should come out pull the bulb out and you are done.
Below the black handle is a silver ring, you need to loosen that all the way and then twist of knob handle.
Still the twist of fate
I shut mine off by crossing the wire on the sensor; strip the protective palstic from the wires and twist them together. Probably a bad sensor that opens the loop to the alarm system.
First stick a nail(or screw driver) between the handle bar and handle grips than get about three pinches of sand or dirt in-between the two after that take the nail out and twist and pull and it should come out.
drop the tailgate. there are two Phillips head screws in the tailgate jamb. those hold the tail light assembly in place. undo, pull out tail lite assembly, unplug the faulty bulb wire harness, twist out the faulty bulb, reinstall in the reverse order.