Check fuse # 3 , that is a 15 amp fuse for your parking lights if all 4 don't work
What are the headlights doing? Is the bulb burned out? Are the lights not coming on at all? Are they misaligned?
4x4 dash lights not working 94 ranger
one of two things, BAD EARTH, or Relay switch.
the #3 slot is for the parking lights #11 is for the warning lights #21 is for hazzard lights and #26 is the back up lights the #3 slot is for the parking lights #11 is for the warning lights #21 is for hazzard lights and #26 is the back up lights
you have a short or maybe it's a fuse shot
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
As soon as you start the vehicle ( and parking brake is released) they automatically come on (Helpfull)
I have the same problem with my 1999. The tail lights as well as the interior instrument panel and the license plate lights are all not working.
If you mean the headlight switch, pulling it out once turns on the dash lights and turns off the daytime running lights, pulling it again turns on the headlights.
Do any of your courtesy lights work , or your headlights ? If not , it sounds like a poor cable connection to your battery or a dead battery
AnswerIf the lights work on the flash to pass but do not work otherwise either the switch is bad or the dimmer switch is bad. I just am working on a 1995 Ranger and found the dimmer switch to be bad. I checked the headlight switch and that was good so I found the dimmer switch to be the problem. I jumped the wires after unplugging the dimmer switch and lights come on. Replace the headlight dimmer switch and good to go! Hope this helps.
Bad dash ground.