As soon as you start the vehicle ( and parking brake is released) they automatically come on (Helpfull)
Im pretty sure that you half to purchase a daytime running light module from the dealorship.
On my 2005 just turn the light switch all the way clockwise when looking at the end of the lever on the stock( the left hand lever).
well 1st off, you need to look @ the info. sicker on the side of your driver side door. it has the weight of the van tire size and all of that jazz. at bottom sticker it will say what country your caravan was made in. if your dodge caravan was made in the good ol US of A then your out of luck. if it says your caravan was made in CANADA then you might be in luck. take your Canadian made caravan to your local dodge - jeep - or Chrysler dealer and for a reasonable fee that should tell you if your day time running lights can be activated or not. im a HUGE FAN of day time running lights my self and im looking @ purchessing a 2007 grand caravan SXT and it will be equipped with factory daytime running lights or i won't buy it! starting 1990 Canada requires by law that all Canadian cars manufactors equip their cars with daytime running lights. I think its HIGH TIME THE USA DID THE SAME! good luck 2 u. ;-)
The Dodge Magnum DRL (Daytime Running Lights) is not enabled for U.S. market as a standard delivery item. You can take your car to any DCX dealer and their service department can enable them using a computer called a Starscan. It is very simple to do and some will do it for free, but look in the $50.00 range as a fee.
350 feet ahead
five to eight feet
1Park the blazer on a flat surface and remove the keys from the ignition. Locate the instrument panel fuse block on the underside of the steering wheel, close to the brake pedal.2Remove the cover from the instrument panel fuse block by turning the fastener counterclockwise. On the underside of the cover, you will find a fuse extractor.3Remove the daytime running lamp fuse using the fuse extractor. The daytime running lamp fuse is the fuse numbered "15."4Place the fuse extractor back onto the cover and place the cover back onto the fuse block. Without the DRL fuse, the daytime running lamps will no longer function properly. To enable the DRLs, simply install a new 15A fuse
if they are not on and they are supposed to be then first check ur fuse pannel and be sure that it is a good fuse and if that's not the problem then sometimes the emergency brake causes them not to come on..... so check and see if the E-brake is one click down (it is not enabled at one click) if it is then un-lock it and they should come on Was your Jeep an American one?If so you will have to take it to the dealer and have it reprogrammed
All late model chrysler ,dodge and jeeps are capable of factory day time running lights. They are pre-programed in all canadian cars and some rentals here in the us. You need to have the dealer enable them with their starscan tool. 10 minutes is about all it takes to go thru the program menus on the star scan so dealers should not charge more than 1/2 hour labor, or if you have a good relashionship with the service manager then he might throw it in when they do some other work on your car. Some dealers wont do it at all ,since not all techs are familiar with all the star scan menus . You need then to find the right dealer with the right tech.
I do believe that it's between 1000 and 1200 feet
my bike enables me to get faster in running from your from your friend diamond xoxoxoxo
running to body block savala