Want this question answered?
Key on, engine off. (if push button start, press button twice without touching brake) press gas pedal to the floor three times.Key on, engine off. (if push button start, press button twice without touching brake) press gas pedal to the floor three times.
put bike on stand turn key to on position press and hold brake pedal on floor bored press start button
This is because of the antilock brake systems, or ABS. When the ABS is activated in a vehicle it can feel like the pedal is pushing back at you when you stop or start to slowly press the brakes.
False. If you have anti-lock brakes, just press firmly on your brake pedal and the computer will take over. Do not pump the brake pedal.
False. If you have anti-lock brakes, just press firmly on your brake pedal and the computer will take over. Do not pump the brake pedal.
False. If you have anti-lock brakes, just press firmly on your brake pedal and the computer will take over. Do not pump the brake pedal.
The most likely cause is the vacuum pump has failed. press the brake pedal a few times with the engine off keep your foot on the pedal and start the car your foot should drop slightly if it does not either the vacuum pump or the servo itself is faulty.
Press the ENGINE START/STOP button once without depressing the brake pedal
depress the brake pedal and turn the engine switch to the start posiiton and start the engine,,, Does this mean to hold the brake down until you hear the engine start.
Start the engine. Place you foot on the brake pedal, and press fairly hard and hold the pedal down. If the pedal very slowly, moves toward the floor any at all, the master cylinder is defective. Replace it immediately!!!!!
Put the card in, press the brake or clutch and press start
Start the engine and then push the brake pedal down. If it is soft and easy to push then the booster is okay. If booster is BAD the brake pedal would be hard to push.