According to the Haynes manual, code 13 means "MAP sensor vacuum circuit" and will activate your Check Engine light.
The plug-in for a code reader on a 1990 Dodge Dakota is located under the hood along the firewall.
Cycle ignition key on,off,on,off,on and count the flashes of the check engine light. It will flash two digit codes. Two flashes, pause, two flashes would be a code 22. The other option is an OBD 1 capable scan tool.
no
The fuse for the code reader plug on a 2001 Dodge Dakota is on the drivers side under the steering wheel by the emergency brake or clutch.
Cylinder #5 misfire
P0700 transmission code present. The engine computer stores this code when the transmission computer has detected a malfunction and set a code. You need to have the transmission computer checked for codes.
Code 41 is for the alternator not charging properly.
According to Haynes Repair manual, fault code 12 (1 flash, pause, 2 flashes from check engine light) means 'Memory standby power lost'. Battery has been disconnected recently.
Cycle the ignition on/off/on/off/on and count the flashes of the check engine light. A pattern of two flashes, pause, two flashes would be a code 22.
The trouble codes on an 1988 Dakota are two digit codes. Code 1 does not exist.
Trouble code P0304 means:Cylinder 4 misfire detected
OK there are Three Engines in this truck.1992 DODGE TRUCKS DAKOTA 2.5L 4-cyl Engine Code [G]Engine, with WIX Filter 51085..........4.6 quarts [1]1992 DODGE TRUCKS DAKOTA 3.9L 6-cyl Engine Code [X]Engine, with WIX Filter 51085..........4.1 quarts [1]1992 DODGE TRUCKS DAKOTA 5.2L 8-cyl Engine Code [Y]Engine, with WIX Filter 51085 ..........5 quarts [1][1]. After refill check oil level.