Want this question answered?
need to find out what is the spindle nut torque specification for a 2001 KIA RIO
i need how much pression (torque) for head daewoo nubira 2001 2.0
The harmonic balancer torque specifications are different in each type of engine. The general torque specification is between 120 pounds and 180 pounds.
hondahookup.com has manuals u can download with the info u need
T-45
There are torque specs for every nut and bolt on that vehicle. You need to narrow it down which one you want.
I need the torque and secuense for the hea d bolts for a Chevrolet Malibu 2000 3.1
need torque specs for 3.4 pontiac grand am intake and rocker arms
generally the spindle nut needs replacing when you remove the nut. the new nut has a nylon locking ring on it, that is only designed to stay tight one time. once this is removed the nut will not stay tight with a second application The nut is a torque to yield design. After reaching torque specs, the threads have stretched. Reusing the nut will allow the nut to back off, since you can't properly torque it but one time.
This bearing is NOT preloaded by a torque spec.It has a end play specification to guaranty it has enough clearance to operate safely.You Need To Get A Proper Repair Manual With Photos And Procedures For this As you Have A Dangerous Idea On What To Do.
Yes, any bolt that has a torque specification should be torqued for safety concerns. Not enough torque on the bolt can allow it to loosen up and too much torque can cause the bolt/nut thread to fail.
There is no specific pinion nut torque that needs to be reached.. You just need to tighten the nut until the correct pinion preload is reached.