So you remove it and replace with a new one - this is not a high tech task.
10-40
AE-10 is a part number from Zinga, which is the same as the WIX 51551. Usual application is as a hydraulic oil filter. It is a 10 micron filter.
Use a quality oil filter wrench and turn the filter counterclockwise.
If you mean that you changed oil , then RAN THE ENGINE with the old oil filter installed , then changed the oil filter , you just mixed the dirty oil in the old engine oil filter with the new oil that was just put in . So , not the best thing to do
10 40 sae
It is inside the oil pan, is this is automatic. If not, there is no filter.
Requires a special wrench tool. Look on eBay for "Volvo Oil Filter Wrench" They are about $10.
Rebel 250 takes 1.6qts of 10/40 oil. There is no Oil filter on this bike, there is a screen but it is not meant to be changed. Since the engine oil is also the clutch/transmission oil and there is no oil filter it is important to change the oil at regular intervals.
oil capacity for 2.8 liter engine is 4 qts if you do not change the oil filter and 5 qts if do change the oil filter
It should be a PH3980.
9 to 10 quarts depending on which oil filter you use
Another member has informed me of what oil to use (Mobil 1 10-40), the appropriate oil filter wrench (0420-0577) and the oil filter (Onan 122-0836, NAPA 7398, WIX 57398).