The stud can be replaced. If you go to NAPA auto parts and order a "P19" stud kit, it will fit in and replace your broken stud.
If you replaced the correct shift solenoid (SS B), check for a broken band in the trans.
Your pressure gauge may be broken....If it fluctuates, then you know its not your gauge, but if your gauge always reads 80, it may need to be replaced.
how to open hood with a broken cable on a 1994 ford explorer
There could be a belt broken in one of the tires. The rotors may also need turned or even replaced.
how to fix broken concrete drive way be repaired or does it have to be replaced?
you first need to remove the door panel so you can see what is brocken which is done by moving the door handle up and down while looking at the moving parts insid the door. it could be a broken clip which attaches to the latch
Depending where is has broken off, depends to what extent of how much you will have to replace, but worse case scenario is, inside there is a cartridge that has a little lever that the diverter handle attaches too. This whole cartridge needs to be replaced. Depending on the make, it can be costly.
No. A club can only be replaced during your round if broken while playing a shot.
Because its broken
sway bar is broken
If the high beam switch is broken that it should be replaced. When the unit is replaced the high beams will work again.
use the gas tank to masturbate and ejaculate in the engine