I think thers a manual for it
http://manualfile.com/Automotive/Honda/honda-civic-1996-2000-service-manual.html
FAT refers to Floor Automatic Transmission while AT means Automatic transmission in case where shift lever is installed at the steering column
If you have an automatic transmission it is on top of he steering column just before it goes through the firewall. If you have a manual transmission it is on the transmission.
Remove the cover to the shifter column. The indicator light will need to be detached from the wiring harness. Reverse the process to install the new light.
Try either at the lower end of steering column or attached to the linkage on the transmission
Assuming this is also called the neutral/park safety switch, it would be found on the lower portion of the steering column (column shift) or in the console (floor shift). You will not find it on the transmission itself.
yes 1973 to 1983 will work because this is before 1984 when wipers moved to the column in the full size trucks. it will bolt right in directly. good luck
You would have to replace the transaxle, you would have to cut a hole in the floor for the shift column, you would have to get the engine ECM reflashed, you'd have to install a clutch pedal and all mounting hardware.
On a 2002 Ford Explorer : The automatic transmission gear selector lever is on the steering wheel column ( if you are asking about the automatic transmission fluid level dipstick , starting with the 2002 model year of the Ford Explorer four door , there isn't one )
It may be a broken or damage steering column. It may need to be replaced.
the neutral safety switch is located in the steering column,not on the trans.it is part of the switch that the main plug on the column plugs into.
chevy silverado ha automatic transmission . shift lever on column when put in or out of gear flops up and down . is it hard to put a spring in the column to repair
YES