how many volts does a bts uses for it to operate depending on size
because in this voltage harmonics are not present
-48 v is given to BTS because in this voltage Noise generation is minimum. Because two terminal comes out from the battery and through red color wire we ground the +ive terminal so that possibility of noise interference will get zero because noise occurs only in the +ive terminal that's why we use -ive voltage in the BTS.
By BTS, do you mean Base Transceiver Station? Such equipment can be found in cell phone towers. Usually a BTS runs on 48V DC.
1. To reduce the lighting effect mainly in rainy season. 2. Less corrosion because +ve can create more corrosion in the BTS system. 3. Safer for human body.
me
48 is volt scale and negative voltage is used for safety of media, to prevent attanuation and noise.
Typically one GSM BTS hardware can cover a few numbers. Also, some numbers can also be covered by more than one GSM BTS. Since one cell is covered by exactly one BTS, the cell id uniquely identified the concrete BTS.
3g BTS is greater than 2g bts. and it is with new technologies.
BTS works by regularly sending beacon signal in its coverage range, registration the mobile station in its coverage and as soon as the mobile station invokes service a free channel is assigned to it. MS sends its voice or data signal to BTS and BTS sends it to BSC and BSC sends it to MSC and MSC connects to the other side Mobile Station/PSTN phone/ or connects to SMSC if the service is for SMS or SGSN for internet service. Thus BTS is the first contact for connection or release of a mobile service.
The voltage doubler works by charging alternate capacitors on alternate half-cycles. Since the capacitors are in series, the voltage doubles.
Indoor BTS: It is placed in a shelter Air-condition is must Very sensitive Outdoor BTS: No shelter required Air-condition is not a must Not very sensitive comparing to indoor bts
GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm