0
On the plunger duster make sure the nozzle and are not damaged and are free of debris?
Wiki User
∙ 14y ago
Siphon tube
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why can't the plunger be pushed inwards if the nozzle is covered?
We would need to know which device you're asking about to respond to this question.
A doctor pushes down the plunger of the syringe places its nozzle in the medicine and then pulls up the plunger to make the medicine rise up in the syringe?
he pushes the plunger so that he removes the air molecules from the syringe and make it vacuum and then puts it in the medicine and pulls the plunger so that the liquid rises without the air molecules getting in the syringe (arjun)
Why does air rush into a vacuum cleaner nozzle?
To understand why air rushes into a vacuum cleaner nozzle we need to trace air flow in the machine. Let's do that. The motor in a vacuum cleaner spins a fan, and the fan moves air. The air intake for the fan is connected to ducting that is routed to the nozzle. As the fan forces air out in its exhaust stream, it creates low pressure on the suction side of the fan. This low pressure (a partial vacuum) is felt along the air path to the nozzle. At the nozzle, outside air pressure forces air into the ducting where air pressure is lower. The moving air has picked up debris and carries it along. That debris ends up in a bag or filtered dirt canister or someplace else where it can accumulate and be collected for disposal. This applies to machines that have bags or filters to get the debris out of the air stream before it goes through the motor to keep it cool. Some machines isolate the motor from the air stream created by the fan, and the motor is cooled by another fan. These "direct" vacuums operate in a way that sees the air stream and the debris pass through the fan and be driven into a bag. The operation of the fan has created a low pressure area along the ducting between it (the fan) and the nozzle. Outside air pressure, being greater than the low pressure created by the fan and ducted to the nozzle, forces air into the nozzle.
How do you set a fuel injection pump?
if you want to know more about fuel injection pump,browse autoparts-oem.com,there are thousands of fuel pump parts,like nozzle,plunger,head rotor,delvievery valve,repair kit
WHAT IS SR Nozzle?
SR nozzle means "Self Reinforced Nozzle".
What is the nozzle coefficient of a bit nozzle?
0.42
What is convergent divergent nozzle?
Convergent nozzle indicates nozzles will converge with an end closing together at the end divergent nozzles increase size at the end. If air flows in this direction: ---> Convergent nozzle > Divergent nozzle <
How does a wedco model 40730 nozzle work?
The Wedco Nozzle is a CARB compliant spill-proof gas can nozzle. With the nozzle in place you can invert your gas can and it will not leak. Then simply push the nozzle lock and push the nozzle against the rim of the filling throat of the tank you're filling to start the flow of fuel. If you lift the nozzle away from the rim the flow stops.
Where is the rocket nozzle in super Mario sunshine?
You get the rocket nozzle after you open the rocket nozzle box in the level with the blooper boss.
What is the difference between a shell nozzle and a regular nozzle?
About 2 inches
How do you get the rocket nozzle in Super Mario Sunshine?
Jump on a red box with a weird symbol on on it and take nozzle that comes out. You have obtained the rocket nozzle.
How do you get in the building with nozzle boxes in super Mario sunshine?
Use the turbo nozzle.
