Yes. If the paint is faded and oxidized, it might be worth a try cutting and polishing a patch and seeing how it comes up . The paint just under the surface may be sound. I have cut and buffed some sorry looking cars (red ones especially) and their owners have been stunned by the result. If you opt to paint it , wet sand it with 400-600 grit, but before you start, wash and dry the car , and use wax&grease remover twice over. This will prevent scrubbing contaminants into the underlying paint. Do it again before painting. Removing wax and silicone contamination prevents cratering or "fish eyes". Areas such as the roof should be well examined for sun damage such as crazing(a fine pattern of cracks ) such areas must be stripped back to the original primer, and then reprimed.
Yes, if the original is in good shape, not flaky.
You stay in shape
If boat has paint that is in good shape and you just want to change color, sand area with 400 to 600 grit then wipe clean with acetone,lacquer thinner or similar solvent then paint. If Paint is in bad shape strip chemically or sand to remove paint. Sand to 400 grit then you must use a etching primer then paint. It is not recommended that you paint below waterline.
With no body, paint engine problems with good tires $3500. Mild paint or body damage $2800.
There are many different varieties of auto body paint shops in America, and there a large number of good ones. The number one auto body paint shop, if one was to choose one, is Maaco.
carwheels.
It depends on the condition of the walls, but presuming they are in very good shape: Paint, Masking Tape, Sheeting, Roller(s), and Brush(es).
Raisins are good for you body they help you get in shape your breast size increases sometimes
Its actually good to excercise everyday. It keeps your body in shape
Midas is a good place that you can get your car body painted for cheap. There are other auto body places that has good deals on car body paint for cheap, if you look in the yellow pages.
hobbylobby.
Depends on what shape it's in . My experience with it is not good, I often find it poorly applied and flaky. I always scrape it with a wire brush and prime it before applying paint.