Good Comment. mine neither.
The ECU is underneath the driver's seat of the 720 truck
Here's how to turn the memory seat on: 1) Pull the seat all the way forward 2) Tilt the seat all the way forward 3) Tilt the seatback all the way forward It still amazes me that VW dealers don't know how to do this.
Probably not the fuse. If you hear a clicking noise but no movement then the power seat unit is shot. You have to buy a $450 new unit as it comes with the seat rails as well. check ebay. Fred
Assuming the other seat adjustments work, and the switch tests okay, remove the seat, turn it over and inspect the forward/backward mechanism. You will probably find something broken.
The 2004 Nissan Murano is 6 ft. 2 in. (74 in.)10 -way power driver seat wide.
only one side will move forward
driver seat and power mirrors is not working...what to check for??
Pull the rear of the seat bases towards the front seats!Then lay the rear seat backs down.
there should be two bolts behind the passenger seat, take those out. pull the strap on the passenger seat forward and pull the seat back. after you take the passenger seat off you can see the bolts for the front seat, take them off and back the seat out of the lip.
If those two wires a part of the vehicle harness (not the seat itself), they are there to powera power seat if it if a power seat was installed.
flip seat back forward, then grab release handle on the back of the bottom part of the seat and pull seat forward.
on the 89 jeep grand wagoneer there is a lever on the pasanger side between the seat back and the wheel well. The lever is a flat piece of metal that you pull forward to release the lock. the back will fold down and the whole seat tips forward. I hope this helps