Step 1: Open drivers door and leave open.
Step 2: Insert key into the ignition.
Step 3: Turn key to "ON" position and return to "LOCKED" (i.e. off) position. Do this 3 times within 10 seconds. Leave key in the ignition.
Step 4: Open and close the drivers door 3 times. (Door should be left open after this step).
Step 5: ECU should respond by locking and unlocking the doors.
Step 6: Press "UNLOCK" button on remote #1. ECU responds by locking and unlocking the car doors.
Step 7: Press "UNLOCK" button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
Step 8: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
To program the 2004 Concorde spare keyless entry, you can take the vehicle to the dealer or you can download the manual. In the manual, there are steps to reset the keyless entry using your vehicle's VIN and other identifications.
You have to program it with a DRB (Scan tool).
how can i program a remote for a 04 kia spectra
My 2004 land rover discovery 2 doesnt work?
Take the vehicle to a dealer. Not a consumer option.
I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004
The keyless entry system must be programmed with an OBD II tool which the dealer or locksmith has. Sorry that this is not the answer your looking for, I didn't want to hear it either.
You can start your 2004 Rodeo without a keyless entry key. Remove the keyless entry fuse and use your ignition key to start the vehicle.
How do you find the factory set keyless entry code for a 2004 Eddie Bauer Explorer
How do i you program keyless remote for a 2004 malibu?
yes