answersLogoWhite

0

OC stands for Open circuit and means you must replace the sensor mounted at the front of the truck. Easy fix as it is in the middle of the truck by the hood latch in front of the radiator. It has a connector inline.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Does the temperature gauge on a 2001 Malibu have a fuse if so where is it located?

the temperature fuse is located under the hood. in the big box that says FUSES.


Why did your outside temp gauge say ICE this am?

The outside temperature gauge says ICE this morning (AM) because it may be icy outside. Also, the temperature outside may be below 32 degrees, which is freezing temperatures.


How do you replace a rear view mirror in an 1999 Intrigue can't get the button off the mirror?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


What is the word written on the mirror in Pretty Little Liars?

It says SORRY on the mirror


Would the temperature sensor cause the coolant temperature dial to always stay in the middle even with the engine cold and where is it located on a 1996 Mitsubishi Galant?

Unplug the coolant temp sensor and check what the gauge says...If it falls to cold, then the sensor is at fault. If it stays, then the gauge is either faulty or the contact points on the back of the gauges need to be cleaned... Unplug the coolant temp sensor and check what the gauge says...If it falls to cold, then the sensor is at fault. If it stays, then the gauge is either faulty or the contact points on the back of the gauges need to be cleaned...


What could be wrong with the external temperature display in the rearview mirror of a 2003 Chevy Trailblazer if it just says 'OC'?

I have the same problem with my '02 Trailblazer. I think it means open circuit, I asked the dealer when I was there for an unrelated matter and he suggested replacing the enitre mirror for over $400. Needless to day I did not. For a while mine would read OC and then read the temp. I'm guessing loose wire somewhere, but don't know where any of the wires are. Replace the remote sensor unit. This is creating the Open Circuit. Common problem and easy fix.


Why Temp gauge goes to HOT?

What kind of temperature gauge? If it is a bodily thermometer, the thermometers probably have a maximum temperature they can actually measure, that or whoever designed them knew that above a certain temperature you would just be dead, and thus instead of reading 150 degrees it just says hot. I can't think of another thermometer that would just read out "hot".


How do you disassemble the inside rear view mirror mount on a 1998 intrigue?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I'm guessing the 1998 Intrigue uses the same parts. I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


How do you disassemble the metal bracket on the rear view mirror on an 2000 Oldsmobile Intrigue to glue to windshield?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I'm guessing the 2000 Intrigue uses the same parts. I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


Why do engine coolant fan keeping running after engine is turn off on 1999 intrigue?

The engine coolant fan can keep running after the engine is turned off in any car because the temperature gauge is in the radiator. As long as the radiator is still hot, the fan will keep running until the temperature gauge says it has cooled enough.


My car is temperature gauge says it's overheating I filled it with coolant and oil but after a few minutes of driving the gauge is past the hot deadline and the place you put the oil in is smoking?

Could be a bad thermosat. The smoke could be from where you dripped oil onto the engine.


What is a funny joke you tell your friends?

2 blond girls walk down a street and find a mirror. the first blond looks in the mirror and says hmmm i recognize her... The 2nd blond takes the mirror and looks in it, she says THATS ME YOU DUMMY!