It will not mixedhomogeneously&the motor will be effected or failed
There is no relationship between units of mass and either length of capacity. Units of capacity are the cubed units of length.
A chemical change involve the molecular modification of reactants.After a physical change the molecule remain unchanged.
There are slight differences between a mixer and agitator. A mixer has large paddles that thoroughly mix the contents, while an agitator just shakes the contents of the hopper back and forth for less thorough combining.
agitator is a stirring machine, a homogenizer is a device that breaks structure in order to make a homogenious solution
The "specific heat capacity" is simply the heat capacity per unit - it might be per mass unit, per volume unit, or per amount of moles.
From: http://www.fixya.com/support/t1942223-one_part_agitator_moves_other_part Remove Dispenser or Cap: Some models of washing machines utilize a fabric softener dispenser that resides on top of the agitator. This dispenser simply snaps onto the top of the agitator. Other styles utilize a decorative cap. To remove the dispenser, simply grab it and firmly pull up. To remove the agitator cap, insert a small flat-head screw driver into the seam between the agitator cap and the upper agitator (mover). Use a twisting or prying action to pop the cap off of the agitator. Remove Internal Debris Cap: Inside the agitator you will see a cap with a raised handle, much like that of your automobile. Simply reach into the agitator and twist the cap while pulling up. This will remove the cap and its o-ring. Remove Agitator Stud: When looking into the agitator assembly, you will notice a single nut in the center of the agitator. Use a socket kit or nut driver to remove this bolt (agitator stud). Remove the Upper Agitator (Mover): With the bolt removed you should be able to remove the upper half of the agitator (mover) by simply pulling up. Sometimes pulling up will actually remove the whole agitator assembly. If this happens, place the Lower Agitator on the floor and stand on the flat lip. Then Pull up to separate the Upper Agitator (mover) from the Lower Agitator. Remove the Cam and Clutch Dogs: When you remove the upper agitator (mover) it contains the cam and clutch dogs. Tun the assembly upside down. The cam and dogs should then come out.
difference between relation sehema and relation instance in dbms
Ideally a population at its carrying capacity is stable, there is enough for all to survive. The system is usually slightly underdamped and the population will vary between just over its carrying capacity where some individuals suffer and under its capacity where there is a surplus. If the system is severely under damped there are extreme swings in the population. A typical example is the relation between Arctic hares and foxes.
relation between telsa and gauss
what is the relation between management and administration
Relation between liberty and equality
there is/ was no relation between them .