depending on age and rust, it can be a task and a half.if bad corrosion is present, use plenty of oil in the joint between the drum and the axle where it emerges from the drum.there are (on '83 models) a pair of 6 mm jack screws on the drum. remove the Philips screws that are there and substitute 25 or 30 mm hex head screws.tighten the pair alternately while pounding the drum with a dead blow hammer.heat may have to be applied in worst cases.
how do remove the brake drum on a 1991 mazda 323
How do you remove the rear drum brakes on a 1998 ford escort
Once you get your brakes off, I would use a screwdriver to loosen the brake drum. It should come off easily after that.
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
Replace wheel cylinders
it either has front disc brakes and rear drum or it has front and rear disc bakes. look for a flat disc in the front and back - those are front and rear disc brakes-they take pads. The drum brakes take shoes.
First, determine if they are disc or drum. If drum, remove the drum and replace the shoes. If they are disc, remove the caliper (and disc if necessary) replace the shoes and reassemble.
Nut you see after you remove the dust cover, in the middle of the drum, 30mm socket needed to remove
( 1 ) on each of the rear drum brakes
What about 1993 Pontiac drum brakes, please be specific.
Drum? : http://youtube.com/watch?v=FpxQN2esZnU
Drum brakes.