1 5/8 or 1 7/8 open end wrench and threads are left handed thread turn to your right to looseen turn to the left to tighten
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
Hey guys, I trying to take off a fan clutch on my 2003 chev blazer and want to know if I have to remove the radiator to do it.
how to take off the clutch fan in 96 blazer,trying to change water pump?
The wench will be used to remove the clutch fan nut. Remove the nuts holding the fan then remove the fan blade.
Remove the fan itself then remove the clutch from the fan
If Possible Get rid of your Clutch Fan and go Electric! But to answer the question, remove serpentine belt and use a strap wrench to stop clutch from spinning when you try to remove fan clutch nut from water pump!
It is attached to the fan.
by use of fan cluthc wrench ( air hammer)
Take belt off water pump pulley remove fan from pump (4 bolts) remove old clutch from fan install new with same bolts Put fan back on.
I think this one is easy...but not sure I wish someone woould tell if you need special tool or not
you have to have fan clutch wrenches
Remove the top part of the fan shroud,( most shroulds are two piece) unbolt the 4 bolts on the clutch and remove the clutch.