first , you drain the anti-freeze then loosen the bolts on the fan pulley then remove the belt. then take off the nuts off the fan and remove it, then take out the 4 bolts holding the water pump on, clean area, then use a sealant, to fixate the gasket to pump, use 2 bolts to blindly line up the pump, start them, add the other 2, then tighten firmly, put fan on, tighten, then belt , tighten, then tighten the nuts holding the fan. add coolant. park on a hill engine higher to burp system faster, open heater to full blast, add coolant until full, make sure its around 50/50.
700r4
The recommended spark plug gap on a 1996 Chevy C1500 with a V8-305 engine is .060"
How can do I replace a water pump on a 96 camaro z28
1996 chevy c1500 pick up 305 motor bolt torque spec intake manifold
how maany fuel injectors a 1996 Chevy c-1500 NEW ANSWER: It has 6 and they are underneith the upper intake.
My 1996 is governed at 100 on the dot.
Drain the coolant, pull off the top half of the fan shroud take the fan off of the pulley, remove the belt take the coolant hoses off of the pump and take out the four bolts that hold on the pump.
Nothing last forever. Replace water pump it's worn out.
how to replace water pump on a 1999 chevy malibu 2.4
Drain the water from your 1996 Chevy Astro Van cooling system. Remove the water pump belt. Remove the water return hose. Remove the water pump retaining bolts. Reverse the process to install your new water pump.
See the Related Link for "1996 and Up Water Pump Replacement Procedure" to the right for the complete walkthrough with pictures.
How do you replace the front drivers seat on a 1996 Chevy S10 pick up truck