REMOVAL
Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
Loosen the battery negative cable terminal clamp pinch-bolt hex nut.
Disconnect the battery negative cable terminal clamp from the battery negative terminal post. If necessary, use a battery terminal puller (2) to remove the terminal clamp from the battery post.
Loosen the battery positive cable terminal clamp pinch-bolt hex nut.
Disconnect the battery positive cable terminal clamp from the battery positive terminal post. If necessary, use a battery terminal puller (2) to remove the terminal clamp from the battery post.
Remove the battery cables from the battery.
Remove the battery thermal guard (1).
Remove the battery hold down bolt (1) and battery hold down (2) from the battery.
WARNING: Wear a suitable pair of rubber gloves (not the household type) when removing a battery by hand. Safety glasses should also be worn. If the battery is cracked or leaking, the electrolyte can burn the skin and eyes.
Remove the battery from the battery tray.
Answering "How do you replace the brake pads on a 2004 Dodge Durango limited with anti lock brakes?"
The 2004 Dodge Durango has 12 valves.
The 2004 Dodge Durango has a V6 engine.
The 2004 Dodge Durango has a 4-speed automatic.
The 2004 Dodge Durango is a gas-powered vehicle.
The curb weight of the 2004 Dodge Durango is 4692 lbs..
The maximum payload of the 2004 Dodge Durango is 1710 lbs..
The 2004 Dodge Durango has a 28.3 degrees angle of departure.
The 2004 Dodge Durango has single overhead cam (SOHC).
The 2004 Dodge Durango has a 25.0 degrees angle of approach.
The 2004 Dodge Durango's turning circle is 37.5 ft..
The height of the 2004 Dodge Durango is 6 ft. 0 in. (72 in.).