use airchisel to remove bushing then threaded rod with two big, thick washer to compress bushing . take socket to drive bushing in with maul and used some bearing grease to assist in install , dropping passenger side control arm makes it easier. what knuckles
change the sway bar rubber bushings and sway bar link bushings
Put new links in.
No.
lots and lots of wd40
the sway bar you probably need new bushings
It is the sway bar bushings.
would it be subfram bushings that stop the car fromm swaing or sway bar bushings
The sway bar is not adjustable, but you can replace the bushings.
You have to remove the end links, then remove the sway bar bushings (there are two) and the sway bar will come out. Sway Bars usually do not need to be replaced unless they are bend or completely broken. It is usually end links being worn or the bushings being warn out.
The links go on the end on the sway bar and hook to the suspension. Bushings are used to connect the sway bar to cars frame.
possibly sway bar links,bushings, or maybe shocks
Check with a Ford dealer - there was a recall on the front sway bar links because under certain conditions they could fracture - so they were replacing the left and right front sway bar links under the recall. (Helpfull)